Technological Detectors for Belt Conveyors
| 
Detectors of collapses in the overfill | ||||
|---|---|---|---|---|
RHP-5-S11200  |
Flap-type overfill board detector is suitable for fixed conveyors or overfills. It is produced in three basic designs according to supply voltage. |
Catalogue |
User's guide |
|
| RHP-5-S12200 |
Rod overfill detector is suitable for fixed conveyors or overfills. It can be used even for open overfills, e.g. filling into a container. |
Catalogue |
User's guide |
|
| RHP-5-S13200 |
Conic overfill detector is suitable for fixed conveyors or overfills. It is used for open overfills, e.g. filling of very fine material into a container (dust fraction). |
Catalogue |
User's guide |
|
| BOS-4T |
TRod conductivity overfill detector is suitable for fixed and movable conveyors or overfills. The probe works only with BOS-21. The conveyed material: e.g. coal, coke etc. |
Catalogue |
User's guide |
|
| BOS-4L |
Rope conductivity overfill detector is suitable for fixed conveyors or overfills. The probe works only with BOS-21. The conveyed material, e.g. coal, coke, etc. |
Catalogue |
User's guide |
|
| BOS-21 |
Two-channel assessment unit for the conductivity probes BOS-4T and BOS-4L |
Catalogue |
User's guide |
|
| UMV-1 | Complete ultrasonic overfill detector. It is suitable for all types of conveyors, various conveyed materials and various fractions. |
Catalogue |
User's guide |
|
Rotation Detectors | ||||
| SHR-2 | S Rotation detector in a robust design responding to the magnets MHR-2, MHR-3, MHR-4, MHR-5. It does not contain any electronics or movable mechanical parts. It is resistant to atmospheric effects. It does not require feeding. |
Catalogue
|
User's guide
|
|
| VHR-Z | Amplifier modifying pulses from the SHR-2 detector for connection to the assessment unit VHR-10M or to the PLC automat. |
Catalogue |
User's guide |
|
| SHR-3 |
Rotation detector in a robust design responding to the magnets MHR-2, MHR-3, MHR-4 and MHR-5. It contains an amplifier of pulses for connection to the assessment unit VHR-10 or to the PLC automat. It requires feeding. |
Catalogue
|
User's guide
|
|
| MHR-2, MHR-3, MHR-4, MHR-5 | Magnets for the rotation detectors SHR-2 and SHR-3. |
Catalogue |
User's guide |
|
| VHR-10M | Two-channel assessment unit of the creep of belt conveyors and other rotating machines. It assesses pulses from detectors. It allows information data transfer, see automation. |
Catalogue |
User's guide |
|
| K1-VHR-10M-D | Box with the equipment for the assessing unit of the creep of VHR-10M. It is intended for connection of two detectors SHR-2. It is necessary to select the type VHR-10M for the box. |
Catalogue |
User's guide see catalogue |
|
| K1-VHR-10M-S | Box with the equipment for the assessing unit of the creep of VHR-10M. It is intended for connection of one detector SHR-2. It is necessary to select the type VHR-10M for the box. |
Catalogue |
User's guide see catalogue |
|
| K1-VHR-10M-I | Box with the equipment for the assessing unit of the creep of VHR-10M. It is intended for connection of two detectors SHR-3 or other detectors except for SHR-2.. It is necessary to select the type VHR-10M for the box. |
Catalogue |
User's guide see catalogue |
|
Belt Alignment Switches | ||||
| LHPE-10/2-L50V | Electromechanical belt alignment switch in a robust design with an adjustable lever. It switches in a two-stage mode at the angles of 15° and 25°. The box – glass-fabric laminate. Contact 2 × module 1 × break-type contact and 1 × closing contact. |
Catalogue |
User's guide Inavailable |
|
| LHME-10/2-L50V | Electromechanical belt alignment switch in a robust design with an adjustable lever. It switches in a two-stage mode at the angles of 15° and 25°. The box – grey cast iron. Contact 2 × module 1 × break-type contact and 1 × closing contact. |
Catalogue Inavailable |
User's guide Inavailable |
|
| LHPE-10/1-L50 | Electromechanical belt alignment switch in a robust design with an adjustable lever. It switches at the angle of 25°. The box – glass-fabric laminate. Contact 1 × module 1 × break-type contact and 1 × closing contact. |
Catalogue Inavailable |
User's guide Inavailable |
|
| LHME-10/1-L50 | Electromechanical switch in a robust design with an adjustable lever. It switches at the angle of 25°. The box – grey cast iron. Contact 2 × module 1 × break-type contact and 1 × closing contact. |
Catalogue Inavailable |
User's guide Inavailable |
|
| LHPE-10/2-LV | Electromechanical belt alignment switch in a robust design with a fixed lever. It switches in a two-stage mode at the angles of 15° and 25°. The grey cast iron. Contact 2 × module 1 × break-type contact and 1 × closing contact. |
Catalogue Inavailable |
User's guide Inavailable |
|
| LHME-10/2-LV | Electromechanical belt alignment switch in a robust design with a fixed lever. It switches in a two-stage mode at the angles of 15° and 25°. The box - grey cast iron. Contact 2 × module 1 × break-type contact and 1 × closing contact. |
Catalogue Inavailable |
User's guide Inavailable |
|
| LHPE-10/1-L | Electromechanical belt alignment switch in a robust design with fixed lever. It switches at the angle of 25°. The box – glass-fabric laminate. Contact 1 × module 1 × break-type contact and 1 × closing contact. |
Catalogue Inavailable |
User's guide Inavailable |
|
| LHME-10/1-L | Electromechanical belt alignment switch in a robust design with fixed lever. It switches at the angle of 25°. The box – grey cast iron. Contact 1 × module 1 × break-type contact and 1 × closing contact. |
Catalogue Inavailable |
User's guide Inavailable |
|
| VSP-3B | Multidirectional electromechanical belt alignment switch in a robust design with a spring lever. It switches in all directions. The box – steel. Contact 1 – change-over contact. |
Catalogue |
User's guide Inavailable |
|
| ET-4T | Electromechanical belt alignment switch with an adjustable lever. It switches at the angle of 15°. The box – steel. Contact 1× change-over contact. Only for small conveyors in light industries. |
Catalogue |
User's guide Inavailable |
|
| Other switches are on the page Emergency Stop Safety Switches | ||||
End Switches | ||||
| LHPE-10/1-R | Electromechanical end switch in a robust design with a fixed lever. It switches at the angle of 25°. The box – glass-fabric laminate. Contact 1 × module 1 × break-type contact and 1 × closing contact. |
Catalogue Inavailable |
User's guide |
|
| LHPE-10/2-R2 | Electromechanical end switch in a robust design with a fixed lever. It switches with the distinction between the right and left sides. The box – glass-fabric laminate. Contact 2 × module 1 × break-type contact and 1 × closing contact. |
Catalogue Inavailable |
User's guide |
|
| Other switches are on the page Emergency Stop Safety Switches | ||||
Material Detection | ||||
| UMV1 | Complete ultrasonic detector for material detection on the conveyor belt. It is suitable for all types of conveyors, various conveyed materials and various fractions. |
Catalogue |
User's guide |
|
| UMV1 s PID | Complete ultrasonic detector for material detection on the conveyor belt with the PID regulation. It is suitable for all types of conveyors, various conveyed materials and various fractions. |
Catalogue Inavailable |
User's guide |
|
| MANAPA | Sensor to detect the presence of material on the belt |
Catalogue |
User's guide |
|
| Metal Detectors – see the separate page | ||||
| Humidity Measuring – see the separate page | ||||